Decespugliatori Ghedini Attachments.

Brushcutters Flailcutters Ghedini Attachments

Suitable for any type of mini excavator, excavator, skid or backhoe loader. Strangth and reliability are their main features. They are machines suitable for the cleaning of the slopes brambles, or for the reclamation of the construction site from brushwood. Mounted on mini excavators they can work in confined spaces or help in the maintenance of hedges and parks. The most powerful models smash branches even on large diameters.

Our standard DA series hydraulic brushcutters are designed for mini-midi excavators with operating weight up to 5.5 tons.


DOWNLOAD THE TECHNICAL SHEET

The built-in-unit carpentry in our DA (standard) series, like a normal bucket,  allows it greater resistance to possible accidental impacts.


The anti-shock and anti-cavitation valves are set to 160 bar, in order to protect the engine from possible damage due to a sudden change in pressure. The motor is bidirectional and made of aluminum. Drainage is not necessary: ​​it only works with the inlet and outlet oil pipes. The rotor works at 3000 rpm for a better cut of the shrubs.


The knives are Y-shaped, with an extra knife in the middle, allowing you to cut branches up to 6/8 cm in diameter. You can get the product with direct coupling to the excavator arm, according to measures given by the client, or with a quick coupler. Available also a hammer rotor suitable for 840mm or 1080mm working widths.

The Ghedini Attachments hydraulic brushcutters of the DA Heavy series are designed to be applied to mini – midi excavators with an operating weight between 2 and 7 tons. The hydraulic power supply takes advantage of the hydraulic power take-off with which excavators are usually equipped. 3 models are available in operating widths of 650, 840 and 1,080 mm.

DOWNLOAD THE TECHNICAL SHEET

The built-in-unit carpentry in our DA (heavy) series, like a normal bucket, allows it greater resistance to possible accidental impacts.


The anti-shock and anti-cavitation valves are set to 160 bar, in order to protect the engine from possible damage due to a sudden change in pressure. The motor is bidirectional and made of aluminum. Drainage is not necessary: the inlet and outlet oil pipes are sufficient for operation.
The rotor runs at 3000 rpm for a better cut.


The knives are Y-shaped, with an additional knife in the middle, allowing you to cut branches up to 6/8 cm in diameter. The DA Series (Heavy) brushcutter is exclusively built with SKF bearings, nuts and clamps. You can get the product with direct coupling to the excavator arm, according to measures given by the client, or with a quick coupler. Available also a hammer rotor suitable for different working widths.

The Ghedini Attachments DB series brush cutters have been designed to be applied to all those excavators weighing between 6 and 8 tons. The hydraulic power supply takes advantage of the hydraulic power take-off that the excavators are equipped with. The bidirectionality of the rotor and the absence of a support roller make the brush cutter able to work in both directions.

DOWNLOAD THE TECHNICAL SHEET

The built-in-unit carpentry of our DB Series brushcutter, like a normal bucket, allows it greater resistance to possible accidental impacts.


The anti-shock and anti-cavitation valves are set to 160 bar, in order to protect the engine from possible damage due to a sudden change in pressure. The motor is bidirectional and made of aluminum. Drainage is necessary only for counter pressures > 7 bar. The rotor runs at 3000 rpm for a better cut.


The knives are Y-shaped, with an extra knife in the middle, allowing you to cut branches up to 12cm in diameter.
The DB brushcutter is exclusively built with SKF bearings, nuts and clamps. You can get the product with direct coupling to the excavator arm, according to measures given by the client, or with a quick coupler. Available also a HD rotor with hammers or knives.

The Ghedini Attachments hydraulic brushcutters of the DC series have been designed for applications on skid loaders with an oil flow to the auxiliary circuit (PTO) of at least 26 l/m.


They are available in four versions: 1,080, 1,300, 1,600, 1,900 mm of useful working width.

DOWNLOAD THE TECHNICAL SHEET

The built – in- unit carpentry of our DC Series brushcutter guarantees greater resistance to possible accidental blows. The connection plate is a standard BOBCAT, welded or bolted, with the possibility of adjusting its position. The anti-shock and anti-cavitation valves are set to 160 bar, in order to protect the engine from possible damage due to a sudden change in pressure.


The engine is made of aluminum. Drainage recommended only for back pressures up to 7 bar. The rotor runs at 3000 rpm for a better cut. The knives are Y-shaped, with an extra knife in the middle, which allows you to cut branches up to 12/15 centimeters in diameter. Available also a HD rotor with hammers or knives.
Exclusively built with SKF bearings, nuts and fasteners.

The Ghedini Attachments hydraulic brushcutters of the DK Series have been designed to be applied to excavators with an operating weight between 7 and 25 tons.

There are 3 models of operating width 1,300,1,600, 1,900 mm. The bidirectionality of the rotor and the absence of a support roller make the brush cutter able to work in both directions.

DOWNLOAD THE TECHNICAL SHEET

The built-in-unit carpentry of our DK Series brushcutter, like a normal bucket, allows it greater resistance to possible accidental impacts.

The connection saddle has bolted pins, with the possibility of adjusting its position. The anti-shock and anti-cavitation valves are set at 160 bar, in order to protect the engine from possible damage due to a sudden change in pressure.
The engine is made of aluminum. Drainage is necessary only for counter pressures > 7 bar.

Possibility of HD rotor with hammers or knives.

The rotor runs at 3000 rpm for better shrub cutting.


The knives are Y-shaped, with an extra knife in the middle, which allows you to cut branches up to 14cm in diameter. Exclusively built with SKF bearings, nuts and fasteners.


Brushcutters Flailcutters Ghedini Attachments.

Keep in touch with Ghedini Attachments and discover all the news on our social channels:

Facebook

Youtube